|
Low Resistance Standard
|
Reconstrudio
Solicitar información
|
|
The 4210 Standard Resistor is a Thomas-Type 1 ohm resistor. Stated value of 1 ohm has this limit of error: Adjusted within 5 ppm (0.0005%) …
|
Reconstrudio
Solicitar información
|
|
Leeds and Northrup 5300 Type S Test Set
|
Reconstrudio
Solicitar información
|
|
PORTABLE KELVIN BRIDGE
|
Reconstrudio
Solicitar información
|
|
Leeds & Northrup 8686
Millivolt Potentiometer
Portable, self-contained unit with built-in galvanometer, standard cell, & batteries
Ranges from -10.100 to +100.100 mV & +1010.000 to +1020.000 …
|
Reconstrudio
Solicitar información
|
|
Resistance Standard. Fixed value of 0.1 Ohm, +/-0.002% accy
|
Reconstrudio
Solicitar información
|
|
|
|
Reconstrudio
Solicitar información
|
|
|
Nominal value: 100 Ohms
Current rating: ?0.001% limit of error, 0.03 A; ?0.02% limit of error, 0.1 A
Terminals: four (2 current and 2 potential)
|
Reconstrudio
Solicitar información
|
|
|
STANDARD RESISTOR
|
Reconstrudio
Solicitar información
|
|
|
The 7592 Volt Box is used to extend the range of potentiometers in a variety of applications in which the voltages exceed the maximum range …
|
Reconstrudio
Solicitar información
|
|
Current Shunt
The 4363 Current Shunt consists of a continuous strip of manganin in one fold, held in position by a spacer.
Resistance: 0.001 ohms
Current Rating: …
|
Reconstrudio
Solicitar información
|
|
|
|
Reconstrudio
Solicitar información
|
|
|
The 4221B Reichsanstalt-Type Resistance Standard can be used in the accurate measurement of current with a potentiometer, and as a standard for comparison in low-resistance …
|
Reconstrudio
Solicitar información
|
|
|
The Leeds-Northrup 4287 is a precision D-C kelvin bridge
|
Reconstrudio
Solicitar información
|
|
|
The Reichsanstalt-Type 4222B Resistance Standard can be used in the accurate measurement of current with a potentiometer, and as a standard for comparison in low-resistance …
|
Reconstrudio
Solicitar información
|
